GNU.WIKI: The GNU/Linux Knowledge Base

  [HOME] [HowTo] [ABS] [MAN1] [MAN2] [MAN3] [MAN4] [MAN5] [MAN6] [MAN7] [MAN8] [MAN9]

 


PHHTTPD HTTP Accelerator HOWTO

Zach Brown

David C. Merrill

Copyright � 2000 by Zach Brown

Copyright � 2001 by David C. Merrill

2001-04-24
Revision History                                                             
Revision 1.1           2001-04-24            Revised by: DCM                 
Converted to DocBook 4.1 article, with some minor language cleanup. Copyright
passed from Zach Brown to David C. Merrill.                                  
Revision 1.0           2000                  Revised by: ZB                  
Initial release.                                                             


This document explains the use of the phhttpd http server accelerator under
Linux.

As of the later 2.3 kernels, and offically in 2.4 and later, the TUX http
accelerator is included in the standard Linux kernel tree. Therefore, this
document should be considered obsolete for most users.

-----------------------------------------------------------------------------
Table of Contents
1. Copyright and License
2. Introduction
    2.1. Architectural Overview
    2.2. Supported Systems
   
   
3. Configuration File
    3.1. Overview
    3.2. Global Config Section
    3.3. Virtual Servers
   
   
4. Logging
    4.1. Overview
    4.2. Configuration
    4.3. Format and Strange Behaviour
   
   
5. Run Time Facilities
    5.1. Overview
    5.2. Log Rotating
    5.3. Status Reporting
   
   

-----------------------------------------------------------------------------
1. Copyright and License

This document is copyright 2000 by Zach Brown, and 2001 by David C. Merrill.
It is released under the GNU Free Documentation License, which is hereby
incorporated by reference.
-----------------------------------------------------------------------------

2. Introduction

phhttpd is an HTTP accelerator. It serves fast static HTTP fetches from a
local file-system and passes slower dynamic requests back to a waiting
server. It features a lean networking I/O core and an aggressive content
cache that help it perform its job efficiently.
-----------------------------------------------------------------------------

2.1. Architectural Overview

phhttpd features a very slim I/O core. It does all its networking work using
non-blocking system calls driven by whatever event model is most appropriate
for the host operating system. This allows a single execution context to
handle as many client connections as the event model dictates.

phhttpd's job is to serve static content as quickly as it possibly can. To do
this it maintains a cache of content in memory. When a request is serviced,
phhttpd saves a reference to the on disk content and whatever HTTP headers
are dependent on the content. The next time a request for this content is
received, phhttpd can service it very quickly. This cache can be prepopulated
(populated at run time), or can be built dynamically as requests come in. Its
size may also be capped by the administrator so that it doesn't overwhelm a
system.

phhttpd is a threaded stand alone daemon. The number of threads is currently
statically defined at run time. Incoming connections are evenly balanced
among the running threads, regardless of what content they may be serving.
Connections are served by the thread that accepted them until the transfer is
done.
-----------------------------------------------------------------------------

2.2. Supported Systems

phhttpd is currently only expected to build and run on Linux systems using
glibc2.1 under a kernel that supports passing POLL* information over
real-time SIGIO signals. This means later 2.3.x kernels or a 2.2.x kernel
that has been patched.

I badly want this to change. If you're interested in doing porting work to
other Operating Systems, please do let me know.
-----------------------------------------------------------------------------

3. Configuration File

3.1. Overview

phhttpd uses an XML config file format to express how it should behave while
running. More information on XML may be found near [http://www.w3.org/XML/]
http://www.w3.org/XML/

phhttpd's configuration centers around the concept of virtual servers. For
us, a virtual server may be thought of as the merging of a document tree and
the actions phhttpd takes while serving that content.

phhttpd.conf may be thought of as having two main sections. The global
section, which defines properties that are consistent across the entire
running phhttpd server, and multiple virtual sections that describe
properties of that only apply to a virtual server. There will only be one
global section while multiple virtual sections are allowed.
-----------------------------------------------------------------------------

3.2. Global Config Section

The global section defines properties of the running server that don't apply
to a single virtual server. It should be enclosed in

Global config entities

cache max=NUM
    Sets the maximum number of cached responses that will be held in memory.
    Each cached responses holds a minimal amount of memory. More importantly,
    each cached response holds an open file descriptor to the file with real
    content and an mmap()ed region of that content. phhttpd will start
    pruning the cache when it notices either of these two resources coming
    under pressure, but has no way to easily deduce that its running low on
    memory. The administrator may set this value to set an upper bound on the
    number of responses to keep in memory. 
   
 control file=PATH 
     This specifies the file that will be used to talk with phhttpd_ctl. 
   
 globallog file=PATH 
     This specifies the file to which global messages will be logged. 
   
 mime file=PATH 
     This specifies the file that contains the mapping of file extensions to 
    MIME types. It should be of the form:
    text/sgml                       sgml sgm                         
                                                                     
    video/mpeg                      mpeg mpg mpe                     
     
   
 timeout inactivity=NUM 
     Controls various network connection timeouts. 'inactivity' sets the
    amount of time that a connection can be idle before phhttpd will forcibly
    disconnect it. inactivity defaults to 0, which lets the connections idle
    until TCP timeouts take effect. 
   
 sendfile 
     Enabling this option tells phhttpd to use sendfile() rather than write()
    ing from an mmap()ed region. Avoiding calling mmap() will shorten the
    amount of time it takes to build cached responses. 
   

 
-----------------------------------------------------------------------------

3.3. Virtual Servers

A Virtual Server can be thought of as the abstraction serving up a content
tree ( "docroot" in Apache speak). There are a set of attributes that are
used to define a virtual server. These attributes are used to decide which
virtual server will process a client's request. Then there are attributes
which define how the content is served.

A virtual server must have a docroot. The virtual tag in the config file has
a docroot attribute that must be set.

<virtual docroot=PATH>                                                       
                                                                             
        ...                                                                  
                                                                             
</virtual>                                                                   
There can be as many virtual sections in the configuration file as one likes.

 

Global Config Entities

 md5  
     This enables the generation of the Content-MD5: header. This greatly
    increases the cost of creating a cached response for this virtual,
    because the MD5 function must be applied to the entire content of the
    response. Once the response is created, though, there is no per-request
    overhead. 
   
 prepop  
     This will cause phhttpd to traverse the entire docroot at initialization
    time and prepare cached responses for all the files it finds. This
    happens in the back ground during normal operation, so there is no
    dramatic increase in the time it takes for phhttpd to start serving
    connections. 
   
 name  
     This tag surrounds the string that will be used to identify the server.
    This string will be compared to the Host: header given in the request
    from the client, or will be compared to the 'host part' of the full URL
    if that was given. This will be used in combination with the network
    address and port pair to determine if a request should be served by a
    virtual server. 
   
 listen v4=DOT.TED.QU.AD port=PORT  
     This virtual server will be chosen to serve an incoming request if that
    request was made to the network address specified in this entity. There
    can be as many of these as one likes in a given virtual server, and '*'
    may be specified for either parameter to indicate that all addresses or
    ports should match. 
   
 logs 
     The logs section of the virtual server define the per virtual log files
    that should be written to during operation. See the following section on
    logging. 
   

 
-----------------------------------------------------------------------------

4. Logging

"All kids love log!"
-----------------------------------------------------------------------------

4.1. Overview

 phhttpd maintains log buffers for each log it writes to. Logged events are
put in these buffers at reporting time rather than being immediately written
to disk. These logs are written as they are filled during normal operation,
or at regular intervals. This greatly reduces the performance impact of
keeping detailed logs. 
-----------------------------------------------------------------------------

4.2. Configuration

 phhttpd keeps interesting logs on a virtual server granularity. You can
specify which logs you wish to keep by including an entity in the log section
of a virtual server for each source you wish to log. There is an entity for
each source of logging, and attributes to that entity define where it is
logged. It looks something like this:
<logs>                                                                       
                                                                             
        <LOGSOURCE mode=OCTALMODE file=PATH>                                 
                                                                             
        ...                                                                  
                                                                             
</logs>                                                                      
 

mode is the octal permissions mode of the file that is to be opened. As it is
parsed by dumb routines, a leading 0 is highly recommended. file is the file
to which the logged events will be written. The LOG_SOURCE is one of:


access  Successfully answered requests                          
agent   The value given in the 'User-Agent' HTTP request header 
referer The string given in the 'Referer' HTTP request header   

 
-----------------------------------------------------------------------------

4.3. Format and Strange Behaviour

 phhttpd log entries are contained with a single line in a text file. They
contain the time the log entry was written, an opaque token that is
associated with the connection that caused the log entry, followed by the
actual entry.  

The contents of the 'referer' and 'agent' log entries is simply the string
that was given with the header. The contents of the 'access' log is a little
more interesting. It has the decoded relative URL that was asked for,
followed by the total bytes that were transfered, and the time in seconds
that it took to transfer.
387f7a45 387f7a45800210ac8910500 /index.html - 2132 0                        
is an entry from an 'access' log. 

The first field is the time in seconds since the Unix epoch, a.k.a. time_t.
The second field is associated with the client connection that caused the log
entry. It is constant for the duration of the connection, and is written to
all the logs entries, of whatever type, that are generated. This allows a log
parser to do more complete connection granularity analysis. As it happens,
this opaque token is currently built up of the time the client was connected,
its remote and local network address, etc, but these values most _not_ be
parsed as they may change in the future. 

 Entries generated by a thread will be written in chronological order. If,
however, multiple threads are sharing an output file the resulting entries
may not be written in chronological order. It is up to the parsing programs
to use the 'time' field to sort by, if they care about chronological order. 
-----------------------------------------------------------------------------

5. Run Time Facilities

5.1. Overview

While phhttpd is running it listens to a 'control' socket for messages from
the administrator. The currently provided phhttpd_ctl program allows the
administrator to minimally interact with phhttpd. This provides both control
and status reporting. 

 phhttpd_ctl always wants a --control argument that specifies the control
socket of the running phhttpd daemon. This should match the <control> tag
specified in the config file. 
-----------------------------------------------------------------------------

5.2. Log Rotating

 phhttpd can be told to rotate its logs so that existing logs may be
processed. 

 The --rotate argument to phhttpd_ctl tells phhttpd to rename the existing
files to a unique name, open new files with the previously used names, then
close the renamed logs and start using the newly created files. phhttpd_ctl
will output the names of the newly created files which will be safe to use
once the command exits. 

 The --reopen argument to phhttpd_ctl tells phhttpd to close the existing
file logs and reopen the files with the filenames that were configured. This
implies that an external entity has moved the files to new names and wants
phhttpd to stop using them. 
-----------------------------------------------------------------------------

5.3. Status Reporting

 The --status argument to phhttpd_ctl tells phhttpd to return a quick status
blurb about the server. It contains miscellaneous information about the
running state of the server. 





  All copyrights belong to their respective owners. Other site content (c) 2014, GNU.WIKI. Please report any site errors to webmaster@gnu.wiki.