GNU.WIKI: The GNU/Linux Knowledge Base

  [HOME] [PHP Manual] [HowTo] [ABS] [MAN1] [MAN2] [MAN3] [MAN4] [MAN5] [MAN6] [MAN7] [MAN8] [MAN9]

  [0-9] [Aa] [Bb] [Cc] [Dd] [Ee] [Ff] [Gg] [Hh] [Ii] [Jj] [Kk] [Ll] [Mm] [Nn] [Oo] [Pp] [Qq] [Rr] [Ss] [Tt] [Uu] [Vv] [Ww] [Xx] [Yy] [Zz]


NAME

       zshparam - zsh parameters

DESCRIPTION

       A  parameter  has  a name, a value, and a number of attributes.  A name
       may be any sequence of alphanumeric characters and underscores, or  the
       single  characters `*', `@', `#', `?', `-', `$', or `!'.  The value may
       be a scalar (a string), an integer, an array (indexed numerically),  or
       an  associative array (an unordered set of name-value pairs, indexed by
       name).  To declare the type of a parameter, or to assign  a  scalar  or
       integer value to a parameter, use the typeset builtin.

       The  value  of  a  scalar  or integer parameter may also be assigned by
       writing:

              name=value

       If the integer attribute, -i, is set for name, the value is subject  to
       arithmetic  evaluation.   Furthermore,  by  replacing  `=' with `+=', a
       parameter can  be  added  or  appended  to.   See  the  section  `Array
       Parameters' for additional forms of assignment.

       To  refer to the value of a parameter, write `$name' or `${name}'.  See
       Parameter Expansion in zshexpn(1) for complete details.

       In the parameter lists that follow, the mark `<S>' indicates  that  the
       parameter  is  special.   Special  parameters  cannot  have  their type
       changed or their readonly  attribute  turned  off,  and  if  a  special
       parameter  is  unset, then later recreated, the special properties will
       be retained.  `<Z>' indicates that the parameter does  not  exist  when
       the shell initializes in sh or ksh emulation mode.

ARRAY PARAMETERS

       To assign an array value, write one of:

              set -A name value ...
              name=(value ...)

       If  no  parameter  name exists, an ordinary array parameter is created.
       If the parameter name exists and is a scalar, it is replaced by  a  new
       array.  Ordinary array parameters may also be explicitly declared with:

              typeset -a name

       Associative arrays must be declared before assignment, by using:

              typeset -A name

       When  name refers to an associative array, the list in an assignment is
       interpreted as alternating keys and values:

              set -A name key value ...
              name=(key value ...)

       Every key must have a value in this case.  Note that  this  assigns  to
       the entire array, deleting any elements that do not appear in the list.

       To create an empty array (including associative arrays), use one of:

              set -A name
              name=()

   Array Subscripts
       Individual  elements  of an array may be selected using a subscript.  A
       subscript of the form `[exp]' selects the single element exp, where exp
       is  an  arithmetic  expression  which  will  be  subject  to arithmetic
       expansion as if it were surrounded by  `$((...))'.   The  elements  are
       numbered beginning with 1, unless the KSH_ARRAYS option is set in which
       case they are numbered from zero.

       Subscripts may be used inside braces used to delimit a parameter  name,
       thus  `${foo[2]}' is equivalent to `$foo[2]'.  If the KSH_ARRAYS option
       is set, the braced form is  the  only  one  that  works,  as  bracketed
       expressions otherwise are not treated as subscripts.

       If  the  KSH_ARRAYS  option  is not set, then by default accesses to an
       array element with a subscript that evaluates to zero return  an  empty
       string,  while  an  attempt  to  write such an element is treated as an
       error.  For backward compatibility the KSH_ZERO_SUBSCRIPT option can be
       set  to  cause  subscript  values  0  and  1  to be equivalent; see the
       description of the option in zshoptions(1).

       The same subscripting syntax is used  for  associative  arrays,  except
       that  no  arithmetic expansion is applied to exp.  However, the parsing
       rules for arithmetic expressions still apply,  which  affects  the  way
       that  certain special characters must be protected from interpretation.
       See Subscript Parsing below for details.

       A subscript of the form `[*]' or `[@]' evaluates to all elements of  an
       array;  there  is no difference between the two except when they appear
       within double  quotes.   `"$foo[*]"'  evaluates  to  `"$foo[1]  $foo[2]
       ..."', whereas `"$foo[@]"' evaluates to `"$foo[1]" "$foo[2]" ...'.  For
       associative arrays, `[*]' or `[@]' evaluate to all the  values,  in  no
       particular order.  Note that this does not substitute the keys; see the
       documentation for the `k'  flag  under  Parameter  Expansion  Flags  in
       zshexpn(1) for complete details.  When an array parameter is referenced
       as `$name' (with no subscript) it evaluates to `$name[*]',  unless  the
       KSH_ARRAYS  option  is  set  in which case it evaluates to `${name[0]}'
       (for an associative array, this means the value of the key  `0',  which
       may not exist even if there are values for other keys).

       A subscript of the form `[exp1,exp2]' selects all elements in the range
       exp1 to exp2, inclusive. (Associative arrays are unordered, and  so  do
       not  support  ranges.) If one of the subscripts evaluates to a negative
       number, say -n, then the nth element from the end of the array is used.
       Thus `$foo[-3]' is the third element from the end of the array foo, and
       `$foo[1,-1]' is the same as `$foo[*]'.

       Subscripting may also be performed on non-array values, in  which  case
       the  subscripts  specify  a substring to be extracted.  For example, if
       FOO is set to `foobar', then `echo $FOO[2,5]' prints `ooba'.

   Array Element Assignment
       A subscript may be used on the left side of an assignment like so:

              name[exp]=value

       In this form of assignment the element or range  specified  by  exp  is
       replaced  by  the  expression  on the right side.  An array (but not an
       associative array) may be created by assignment to a range or  element.
       Arrays  do  not nest, so assigning a parenthesized list of values to an
       element or range changes the number of elements in the array,  shifting
       the  other  elements  to  accommodate  the  new  values.   (This is not
       supported for associative arrays.)

       This syntax also works as an argument to the typeset command:

              typeset "name[exp]"=value

       The  value  may  not  be  a  parenthesized  list  in  this  case;  only
       single-element  assignments may be made with typeset.  Note that quotes
       are  necessary  in  this  case  to  prevent  the  brackets  from  being
       interpreted  as  filename  generation operators.  The noglob precommand
       modifier could be used instead.

       To delete an element of an ordinary array, assign `()' to that element.
       To delete an element of an associative array, use the unset command:

              unset "name[exp]"

   Subscript Flags
       If  the  opening  bracket,  or  the  comma in a range, in any subscript
       expression is directly followed by an opening parenthesis,  the  string
       up  to the matching closing one is considered to be a list of flags, as
       in `name[(flags)exp]'.

       The flags s, n and b take an argument; the delimiter is shown below  as
       `:',  but  any  character,  or  the  matching  pairs  `(...)', `{...}',
       `[...]', or `<...>', may be used, but note that  `<...>'  can  only  be
       used  if  the  subscript  is  inside  a  double  quoted expression or a
       parameter substitution enclosed in braces as otherwise  the  expression
       is interpreted as a redirection.

       The flags currently understood are:

       w      If  the  parameter  subscripted is a scalar then this flag makes
              subscripting work on words instead of characters.   The  default
              word  separator  is  whitespace.  This flag may not be used with
              the i or I flag.

       s:string:
              This gives the string that separates words (for use with  the  w
              flag).  The delimiter character : is arbitrary; see above.

       p      Recognize  the same escape sequences as the print builtin in the
              string argument of a subsequent `s' flag.

       f      If the parameter subscripted is a scalar then  this  flag  makes
              subscripting  work  on  lines  instead  of characters, i.e. with
              elements  separated  by  newlines.   This  is  a  shorthand  for
              `pws:
:'.

       r      Reverse subscripting: if this flag is given, the exp is taken as
              a pattern and the result is the first  matching  array  element,
              substring  or  word  (if  the  parameter is an array, if it is a
              scalar, or if it  is  a  scalar  and  the  `w'  flag  is  given,
              respectively).  The subscript used is the number of the matching
              element, so that pairs of subscripts such as `$foo[(r)??,3]' and
              `$foo[(r)??,(r)f*]'  are  possible  if  the  parameter is not an
              associative array.  If the parameter is  an  associative  array,
              only the value part of each pair is compared to the pattern, and
              the result is that value.

              If a search through an ordinary array failed,  the  search  sets
              the  subscript  to  one  past  the  end  of the array, and hence
              ${array[(r)pattern]} will substitute the empty string.  Thus the
              success  of  a  search  can be tested by using the (i) flag, for
              example (assuming the option KSH_ARRAYS is not in effect):

                     [[ ${array[(i)pattern]} -le ${#array} ]]

              If KSH_ARRAYS is in effect, the -le should be replaced by -lt.

       R      Like `r', but gives the last  match.   For  associative  arrays,
              gives  all  possible  matches.  May  be  used  for  assigning to
              ordinary array elements, but not for  assigning  to  associative
              arrays.   On  failure,  for normal arrays this has the effect of
              returning the element corresponding  to  subscript  0;  this  is
              empty unless one of the options KSH_ARRAYS or KSH_ZERO_SUBSCRIPT
              is in effect.

              Note that in subscripts with both `r' and `R' pattern characters
              are  active  even  if  they  were  substituted  for  a parameter
              (regardless of the setting of  GLOB_SUBST  which  controls  this
              feature  in normal pattern matching).  The flag `e' can be added
              to inhibit pattern matching.  As  this  flag  does  not  inhibit
              other  forms  of  substitution,  care is still required; using a
              parameter to hold the key has the desired effect:

                     key2='original key'
                     print ${array[(Re)$key2]}

       i      Like `r', but gives the index of the match instead; this may not
              be  combined  with  a  second  argument.  On the left side of an
              assignment, behaves like `r'.  For associative arrays,  the  key
              part  of  each  pair  is  compared to the pattern, and the first
              matching key found is the result.  On  failure  substitutes  the
              length of the array plus one, as discussed under the description
              of `r', or the empty string for an associative array.

       I      Like `i', but gives the index of the last match, or all possible
              matching  keys  in an associative array.  On failure substitutes
              0, or the empty string for an associative array.  This  flag  is
              best when testing for values or keys that do not exist.

       k      If used in a subscript on an associative array, this flag causes
              the keys to be interpreted as patterns, and  returns  the  value
              for  the  first key found where exp is matched by the key.  Note
              this could be any such key as no ordering of associative  arrays
              is  defined.   This  flag  does  not work on the left side of an
              assignment to an associative array element.  If used on  another
              type of parameter, this behaves like `r'.

       K      On  an associative array this is like `k' but returns all values
              where exp is matched by the keys.  On other types of  parameters
              this has the same effect as `R'.

       n:expr:
              If  combined  with `r', `R', `i' or `I', makes them give the nth
              or nth last match (if  expr  evaluates  to  n).   This  flag  is
              ignored  when the array is associative.  The delimiter character
              : is arbitrary; see above.

       b:expr:
              If combined with `r', `R', `i' or `I', makes them begin  at  the
              nth  or  nth last element, word, or character (if expr evaluates
              to n).  This flag is ignored when the array is associative.  The
              delimiter character : is arbitrary; see above.

       e      This flag causes any pattern matching that would be performed on
              the subscript to  use  plain  string  matching  instead.   Hence
              `${array[(re)*]}'  matches only the array element whose value is
              *.  Note that other forms  of  substitution  such  as  parameter
              substitution are not inhibited.

              This  flag can also be used to force * or @ to be interpreted as
              a single key rather than as a reference to all values.   It  may
              be used for either purpose on the left side of an assignment.

       See  Parameter  Expansion  Flags  (zshexpn(1))  for  additional ways to
       manipulate the results of array subscripting.

   Subscript Parsing
       This discussion applies mainly to associative array key strings and  to
       patterns used for reverse subscripting (the `r', `R', `i', etc. flags),
       but it may also affect parameter substitutions that appear as  part  of
       an arithmetic expression in an ordinary subscript.

       It  is  possible  to  avoid  the  use  of  subscripts in assignments to
       associative array elements by using the syntax:

                 aa+=('key with "*strange*" characters' 'value string')

       This adds a new key/value pair if the key is not already  present,  and
       replaces the value for the existing key if it is.

       The  basic rule to remember when writing a subscript expression is that
       all text between the opening `[' and the closing `]' is interpreted  as
       if  it  were in double quotes (see zshmisc(1)).  However, unlike double
       quotes which normally cannot nest,  subscript  expressions  may  appear
       inside  double-quoted strings or inside other subscript expressions (or
       both!), so the rules have two important differences.

       The first difference is that brackets (`['  and  `]')  must  appear  as
       balanced  pairs in a subscript expression unless they are preceded by a
       backslash (`\').  Therefore, within a subscript expression (and  unlike
       true  double-quoting) the sequence `\[' becomes `[', and similarly `\]'
       becomes `]'.  This applies even in  cases  where  a  backslash  is  not
       normally  required;  for  example,  the  pattern  `[^[]'  (to match any
       character other than an open bracket) should be written  `[^\[]'  in  a
       reverse-subscript  pattern.   However,  note  that  `\[^\[\]'  and even
       `\[^[]' mean the same thing, because backslashes  are  always  stripped
       when they appear before brackets!

       The  same rule applies to parentheses (`(' and `)') and braces (`{' and
       `}'): they must appear either  in  balanced  pairs  or  preceded  by  a
       backslash,  and  backslashes  that  protect  parentheses  or braces are
       removed during parsing.  This is because parameter  expansions  may  be
       surrounded  by  balanced  braces, and subscript flags are introduced by
       balanced parentheses.

       The second difference is that a double-quote (`"') may appear  as  part
       of  a  subscript  expression without being preceded by a backslash, and
       therefore that the two characters `\"' remain as two characters in  the
       subscript (in true double-quoting, `\"' becomes `"').  However, because
       of the standard shell quoting rules, any double-quotes that appear must
       occur  in balanced pairs unless preceded by a backslash.  This makes it
       more difficult to write a subscript expression  that  contains  an  odd
       number  of  double-quote characters, but the reason for this difference
       is  so  that  when  a  subscript   expression   appears   inside   true
       double-quotes, one can still write `\"' (rather than `\\"') for `"'.

       To  use  an  odd number of double quotes as a key in an assignment, use
       the typeset builtin and an enclosing pair of double quotes; to refer to
       the value of that key, again use double quotes:

              typeset -A aa
              typeset "aa[one\"two\"three\"quotes]"=QQQ
              print "$aa[one\"two\"three\"quotes]"

       It  is  important  to  note that the quoting rules do not change when a
       parameter expansion with a subscript is nested inside another subscript
       expression.  That is, it is not necessary to use additional backslashes
       within the inner subscript expression; they are removed only once, from
       the  innermost  subscript  outwards.  Parameters are also expanded from
       the innermost subscript first, as each expansion is encountered left to
       right in the outer expression.

       A  further complication arises from a way in which subscript parsing is
       not different from double quote parsing.  As  in  true  double-quoting,
       the  sequences `\*', and `\@' remain as two characters when they appear
       in a subscript  expression.   To  use  a  literal  `*'  or  `@'  as  an
       associative array key, the `e' flag must be used:

              typeset -A aa
              aa[(e)*]=star
              print $aa[(e)*]

       A   last  detail  must  be  considered  when  reverse  subscripting  is
       performed.  Parameters appearing in the subscript expression are  first
       expanded  and then the complete expression is interpreted as a pattern.
       This has two effects: first, parameters behave as if GLOB_SUBST were on
       (and  it  cannot  be  turned  off); second, backslashes are interpreted
       twice, once when parsing the array subscript and again when parsing the
       pattern.    In   a  reverse  subscript,  it's  necessary  to  use  four
       backslashes to cause a single  backslash  to  match  literally  in  the
       pattern.   For  complex  patterns,  it  is  often easiest to assign the
       desired pattern to a parameter and then refer to that parameter in  the
       subscript,  because  then the backslashes, brackets, parentheses, etc.,
       are seen only when the complete expression is converted to  a  pattern.
       To  match  the  value  of a parameter literally in a reverse subscript,
       rather than as a pattern, use `${(q)name}' (see  zshexpn(1))  to  quote
       the expanded value.

       Note  that  the  `k'  and  `K'  flags  are  reverse subscripting for an
       ordinary array, but are not reverse  subscripting  for  an  associative
       array!   (For  an  associative  array, the keys in the array itself are
       interpreted as patterns by those flags; the subscript is a plain string
       in that case.)

       One final note, not directly related to subscripting: the numeric names
       of positional parameters (described below) are parsed specially, so for
       example   `$2foo'  is  equivalent  to  `${2}foo'.   Therefore,  to  use
       subscript syntax to extract a substring from  a  positional  parameter,
       the  expansion  must  be surrounded by braces; for example, `${2[3,5]}'
       evaluates  to  the  third  through  fifth  characters  of  the   second
       positional  parameter,  but  `$2[3,5]'  is  the entire second parameter
       concatenated with the filename generation pattern `[3,5]'.

POSITIONAL PARAMETERS

       The positional parameters provide access to the command-line  arguments
       of a shell function, shell script, or the shell itself; see the section
       `Invocation', and also the section `Functions'.  The parameter n, where
       n  is a number, is the nth positional parameter.  The parameter `$0' is
       a special case, see the section `Parameters Set By The Shell'.

       The parameters *, @ and argv are arrays containing all  the  positional
       parameters;  thus `$argv[n]', etc., is equivalent to simply `$n'.  Note
       that the options KSH_ARRAYS or KSH_ZERO_SUBSCRIPT apply to these arrays
       as  well,  so  with  either  of  those  options  set,  `${argv[0]}'  is
       equivalent to `$1' and so on.

       Positional parameters may be changed after the shell or function starts
       by  using the set builtin, by assigning to the argv array, or by direct
       assignment of  the  form  `n=value'  where  n  is  the  number  of  the
       positional  parameter  to  be  changed.   This also creates (with empty
       values) any of the positions from 1 to  n  that  do  not  already  have
       values.  Note that, because the positional parameters form an array, an
       array assignment of the form `n=(value ...)' is allowed,  and  has  the
       effect  of  shifting  all  the values at positions greater than n by as
       many positions as necessary to accommodate the new values.

LOCAL PARAMETERS

       Shell  function  executions  delimit  scopes  for   shell   parameters.
       (Parameters  are  dynamically  scoped.)   The  typeset builtin, and its
       alternative  forms  declare,  integer,  local  and  readonly  (but  not
       export),  can  be  used  to  declare  a parameter as being local to the
       innermost scope.

       When a parameter  is  read  or  assigned  to,  the  innermost  existing
       parameter  of  that  name is used.  (That is, the local parameter hides
       any  less-local  parameter.)   However,  assigning  to  a  non-existent
       parameter,  or  declaring  a new parameter with export, causes it to be
       created in the outermost scope.

       Local parameters disappear when their scope ends.  unset can be used to
       delete  a  parameter while it is still in scope; any outer parameter of
       the same name remains hidden.

       Special parameters may also be made local; they  retain  their  special
       attributes  unless  either  the existing or the newly-created parameter
       has the -h (hide) attribute.  This may have unexpected  effects:  there
       is  no  default  value,  so  if there is no assignment at the point the
       variable is made local, it will be set to an empty value  (or  zero  in
       the case of integers).  The following:

              typeset PATH=/new/directory:$PATH

       is  valid  for temporarily allowing the shell or programmes called from
       it to find the programs in /new/directory inside a function.

       Note  that  the  restriction  in  older  versions  of  zsh  that  local
       parameters were never exported has been removed.

PARAMETERS SET BY THE SHELL

       The following parameters are automatically set by the shell:

       ! <S>  The  process  ID  of  the last command started in the background
              with &, or put into the background with the bg builtin.

       # <S>  The number of positional parameters in decimal.  Note that  some
              confusion  may  occur  with the syntax $#param which substitutes
              the length of param.   Use  ${#}  to  resolve  ambiguities.   In
              particular, the sequence `$#-...' in an arithmetic expression is
              interpreted as the length of the parameter -, q.v.

       ARGC <S> <Z>
              Same as #.

       $ <S>  The process ID of this shell.   Note  that  this  indicates  the
              original  shell  started  by  invoking zsh; all processes forked
              from the  shells  without  executing  a  new  program,  such  as
              subshells started by (...), substitute the same value.

       - <S>  Flags  supplied  to  the  shell  on  invocation or by the set or
              setopt commands.

       * <S>  An array containing the positional parameters.

       argv <S> <Z>
              Same as *.  Assigning  to  argv  changes  the  local  positional
              parameters,  but argv is not itself a local parameter.  Deleting
              argv with unset in any function deletes it everywhere,  although
              only  the  innermost positional parameter array is deleted (so *
              and @ in other scopes are not affected).

       @ <S>  Same as argv[@], even when argv is not set.

       ? <S>  The exit status returned by the last command.

       0 <S>  The  name  used  to  invoke   the   current   shell.    If   the
              FUNCTION_ARGZERO option is set, this is set temporarily within a
              shell function to the name of the function, and within a sourced
              script to the name of the script.

       status <S> <Z>
              Same as ?.

       pipestatus <S> <Z>
              An  array  containing the exit statuses returned by all commands
              in the last pipeline.

       _ <S>  The last argument of the previous command.  Also, this parameter
              is  set in the environment of every command executed to the full
              pathname of the command.

       CPUTYPE
              The machine type (microprocessor class  or  machine  model),  as
              determined at run time.

       EGID <S>
              The  effective  group  ID  of  the  shell  process.  If you have
              sufficient privileges, you may change the effective group ID  of
              the   shell  process  by  assigning  to  this  parameter.   Also
              (assuming sufficient privileges), you may start a single command
              with a different effective group ID by `(EGID=gid; command)'

       EUID <S>
              The  effective  user  ID  of  the  shell  process.   If you have
              sufficient privileges, you may change the effective user  ID  of
              the   shell  process  by  assigning  to  this  parameter.   Also
              (assuming sufficient privileges), you may start a single command
              with a different effective user ID by `(EUID=uid; command)'

       ERRNO <S>
              The  value  of  errno (see errno(3)) as set by the most recently
              failed system call.  This  value  is  system  dependent  and  is
              intended  for  debugging  purposes.   It is also useful with the
              zsh/system module which allows the number to be  turned  into  a
              name or message.

       GID <S>
              The  real group ID of the shell process.  If you have sufficient
              privileges, you may change the group ID of the shell process  by
              assigning   to   this   parameter.   Also  (assuming  sufficient
              privileges), you may start a single command  under  a  different
              group ID by `(GID=gid; command)'

       HISTCMD
              The  current  history  line  number  in an interactive shell, in
              other words the line number for the command that caused $HISTCMD
              to be read.

       HOST   The current hostname.

       LINENO <S>
              The  line  number of the current line within the current script,
              sourced file, or shell function being  executed,  whichever  was
              started most recently.  Note that in the case of shell functions
              the line number refers to the function as  it  appeared  in  the
              original   definition,  not  necessarily  as  displayed  by  the
              functions builtin.

       LOGNAME
              If the corresponding variable is not set in the  environment  of
              the  shell, it is initialized to the login name corresponding to
              the current login session. This parameter is exported by default
              but this can be disabled using the typeset builtin.

       MACHTYPE
              The  machine  type  (microprocessor  class or machine model), as
              determined at compile time.

       OLDPWD The previous working directory.  This  is  set  when  the  shell
              initializes and whenever the directory changes.

       OPTARG <S>
              The  value  of the last option argument processed by the getopts
              command.

       OPTIND <S>
              The index of the last option argument processed by  the  getopts
              command.

       OSTYPE The operating system, as determined at compile time.

       PPID <S>
              The process ID of the parent of the shell.  As for $$, the value
              indicates the parent of the original shell and does  not  change
              in subshells.

       PWD    The  present  working  directory.   This  is  set when the shell
              initializes and whenever the directory changes.

       RANDOM <S>
              A pseudo-random integer from 0 to 32767,  newly  generated  each
              time  this parameter is referenced.  The random number generator
              can be seeded by assigning a numeric value to RANDOM.

              The  values   of   RANDOM   form   an   intentionally-repeatable
              pseudo-random  sequence;  subshells  that  reference RANDOM will
              result in identical pseudo-random values  unless  the  value  of
              RANDOM  is  referenced  or seeded in the parent shell in between
              subshell invocations.

       SECONDS <S>
              The number of seconds since shell invocation.  If this parameter
              is assigned a value, then the value returned upon reference will
              be the value that was assigned plus the number of seconds  since
              the assignment.

              Unlike  other  special  parameters,  the  type  of  the  SECONDS
              parameter can  be  changed  using  the  typeset  command.   Only
              integer  and  one  of the floating point types are allowed.  For
              example, `typeset -F SECONDS' causes the value to be reported as
              a  floating point number.  The value is available to microsecond
              accuracy, although the shell  may  show  more  or  fewer  digits
              depending  on the use of typeset.  See the documentation for the
              builtin typeset in zshbuiltins(1) for more details.

       SHLVL <S>
              Incremented by one each time a new shell is started.

       signals
              An array containing the names of the signals.

       TRY_BLOCK_ERROR <S>
              In an always block, indicates whether the preceding list of code
              caused  an  error.   The  value  is  1  to  indicate an error, 0
              otherwise.  It may be reset, clearing the error condition.   See
              Complex Commands in zshmisc(1)

       TTY    The name of the tty associated with the shell, if any.

       TTYIDLE <S>
              The idle time of the tty associated with the shell in seconds or
              -1 if there is no such tty.

       UID <S>
              The real user ID of the shell process.  If you  have  sufficient
              privileges, you may change the user ID of the shell by assigning
              to this parameter.  Also (assuming sufficient  privileges),  you
              may  start  a  single  command  under  a  different  user  ID by
              `(UID=uid; command)'

       USERNAME <S>
              The username corresponding to the real  user  ID  of  the  shell
              process.   If you have sufficient privileges, you may change the
              username (and also the user ID and group ID)  of  the  shell  by
              assigning   to   this   parameter.   Also  (assuming  sufficient
              privileges), you may start a single command  under  a  different
              username  (and  user  ID  and  group ID) by `(USERNAME=username;
              command)'

       VENDOR The vendor, as determined at compile time.

       zsh_eval_context <S> <Z> (ZSH_EVAL_CONTEXT <S>)
              An array (colon-separated list) indicating the context of  shell
              code that is being run.  Each time a piece of shell code that is
              stored within the shell is  executed  a  string  is  temporarily
              appended  to the array to indicate the type of operation that is
              being performed.  Read in order the array gives an indication of
              the  stack of operations being performed with the most immediate
              context last.

              Note that the variable does not give  information  on  syntactic
              context  such  as  pipelines or subshells.  Use $ZSH_SUBSHELL to
              detect subshells.

              The context is one of the following:
              cmdarg Code specified by the -c option to the command line  that
                     invoked the shell.

              cmdsubst
                     Command substitution using the `...` or $(...) construct.

              equalsubst
                     File substitution using the =(...) construct.

              eval   Code executed by the eval builtin.

              evalautofunc
                     Code executed with the KSH_AUTOLOAD mechanism in order to
                     define an autoloaded function.

              fc     Code from the shell history executed by the -e option  to
                     the fc builtin.

              file   Lines  of  code  being  read  directly  from  a file, for
                     example by the source builtin.

              filecode
                     Lines of code being read from  a  .zwc  file  instead  of
                     directly from the source file.

              globqual
                     Code executed by the e or + glob qualifier.

              globsort
                     Code executed to order files by the o glob qualifier.

              insubst
                     File substitution using the <(...) construct.

              loadautofunc
                     Code  read  directly  from a file to define an autoloaded
                     function.

              outsubst
                     File substitution using the >(...) construct.

              sched  Code executed by the sched builtin.

              shfunc A shell function.

              stty   Code passed to stty by  the  STTY  environment  variable.
                     Normally  this  is  passed  directly to the system's stty
                     command,  so  this  value  is  unlikely  to  be  seen  in
                     practice.

              style  Code  executed as part of a style retrieved by the zstyle
                     builtin from the zsh/zutil module.

              toplevel
                     The highest execution level of a  script  or  interactive
                     shell.

              trap   Code  executed  as  a  trap  defined by the trap builtin.
                     Traps defined as functions have the context  shfunc.   As
                     traps   are   asynchronous  they  may  have  a  different
                     hierarchy from other code.

              zpty   Code executed by  the  zpty  builtin  from  the  zsh/zpty
                     module.

              zregexparse-guard
                     Code  executed as a guard by the zregexparse command from
                     the zsh/zutil module.

              zregexparse-action
                     Code executed as an action  by  the  zregexparse  command
                     from the zsh/zutil module.

       ZSH_NAME
              Expands  to  the  basename  of  the  command used to invoke this
              instance of zsh.

       ZSH_PATCHLEVEL
              The revision string for the version number of the ChangeLog file
              in  the  zsh distribution.  This is most useful in order to keep
              track of  versions  of  the  shell  during  development  between
              releases;  hence most users should not use it and should instead
              rely on $ZSH_VERSION.

       zsh_scheduled_events
              See the section `The zsh/sched Module' in zshmodules(1).

       ZSH_SUBSHELL
              Readonly integer.  Initially zero,  incremented  each  time  the
              shell  forks  to  create  a  subshell for executing code.  Hence
              `(print  $ZSH_SUBSHELL)'  and  `print  $(print   $ZSH_SUBSHELL)'
              output 1, while `( (print $ZSH_SUBSHELL) )' outputs 2.

       ZSH_VERSION
              The version number of the release of zsh.

PARAMETERS USED BY THE SHELL

       The following parameters are used by the shell.

       In  cases  where  there are two parameters with an upper- and lowercase
       form of the same name, such as path and PATH, the lowercase form is  an
       array and the uppercase form is a scalar with the elements of the array
       joined together by  colons.   These  are  similar  to  tied  parameters
       created  via `typeset -T'.  The normal use for the colon-separated form
       is for exporting to the environment, while the array form is easier  to
       manipulate  within  the  shell.  Note that unsetting either of the pair
       will unset  the  other;  they  retain  their  special  properties  when
       recreated, and recreating one of the pair will recreate the other.

       ARGV0  If  exported,  its  value  is  used  as  the argv[0] of external
              commands.   Usually  used  in   constructs   like   `ARGV0=emacs
              nethack'.

       BAUD   The  rate in bits per second at which data reaches the terminal.
              The line editor will use this value in order to compensate for a
              slow   terminal   by  delaying  updates  to  the  display  until
              necessary.  If the parameter is unset or the value is  zero  the
              compensation  mechanism is turned off.  The parameter is not set
              by default.

              This parameter may be profitably set in some circumstances, e.g.
              for  slow  modems  dialing into a communications server, or on a
              slow wide area network.  It should be set to the  baud  rate  of
              the slowest part of the link for best performance.

       cdpath <S> <Z> (CDPATH <S>)
              An  array  (colon-separated  list) of directories specifying the
              search path for the cd command.

       COLUMNS <S>
              The number of columns  for  this  terminal  session.   Used  for
              printing select lists and for the line editor.

       CORRECT_IGNORE
              If set, is treated as a pattern during spelling correction.  Any
              potential correction that matches the pattern is  ignored.   For
              example,  if the value is `_*' then completion functions (which,
              by convention, have names beginning  with  `_')  will  never  be
              offered  as spelling corrections.  The pattern does not apply to
              the correction of file names,  as  applied  by  the  CORRECT_ALL
              option  (so with the example just given files beginning with `_'
              in the current directory would still be completed).

       DIRSTACKSIZE
              The maximum size of the directory stack, by default there is  no
              limit.  If the stack gets larger than this, it will be truncated
              automatically.  This is useful with the AUTO_PUSHD option.

       ENV    If the ENV environment variable is set when zsh is invoked as sh
              or ksh, $ENV is sourced after the profile scripts.  The value of
              ENV is subjected to parameter expansion,  command  substitution,
              and arithmetic expansion before being interpreted as a pathname.
              Note that ENV is not used unless zsh is emulating sh or ksh.

       FCEDIT The default editor for the fc builtin.  If FCEDIT  is  not  set,
              the  parameter  EDITOR  is  used;  if  that is not set either, a
              builtin default, usually vi, is used.

       fignore <S> <Z> (FIGNORE <S>)
              An array (colon separated list) containing the suffixes of files
              to   be   ignored   during  filename  completion.   However,  if
              completion only generates files with suffixes in this list, then
              these files are completed anyway.

       fpath <S> <Z> (FPATH <S>)
              An  array  (colon  separated list) of directories specifying the
              search path for function definitions.   This  path  is  searched
              when  a  function  with  the  -u attribute is referenced.  If an
              executable file is found, then it is read and  executed  in  the
              current environment.

       histchars <S>
              Three  characters  used  by  the  shell's  history  and  lexical
              analysis mechanism.  The first character signals the start of  a
              history  expansion  (default `!').  The second character signals
              the start of a quick history substitution  (default  `^').   The
              third character is the comment character (default `#').

              The  characters  must be in the ASCII character set; any attempt
              to set histchars to characters with a  locale-dependent  meaning
              will be rejected with an error message.

       HISTCHARS <S> <Z>
              Same as histchars.  (Deprecated.)

       HISTFILE
              The file to save the history in when an interactive shell exits.
              If unset, the history is not saved.

       HISTORY_IGNORE
              If set, is treated as a pattern at the time  history  files  are
              written.   Any  potential history entry that matches the pattern
              is skipped.  For example, if the value is `fc *'  then  commands
              that  invoke the interactive history editor are never written to
              the history  file  (compare  the  HIST_NO_STORE  option  or  the
              zshaddhistory  hook, either of which would prevent such commands
              from being added to the interactive history at all).

       HISTSIZE <S>
              The maximum number of events  stored  in  the  internal  history
              list.   If  you  use  the HIST_EXPIRE_DUPS_FIRST option, setting
              this value larger than the  SAVEHIST  size  will  give  you  the
              difference as a cushion for saving duplicated history events.

       HOME <S>
              The  default  argument  for  the  cd  command.   This is not set
              automatically by the shell in sh, ksh or csh emulation,  but  it
              is  typically  present  in  the  environment  anyway,  and if it
              becomes set it has its usual special behaviour.

       IFS <S>
              Internal field separators (by default space,  tab,  newline  and
              NUL),  that are used to separate words which result from command
              or parameter expansion and words read by the read builtin.   Any
              characters  from  the  set space, tab and newline that appear in
              the IFS are called IFS white space.  One or more IFS white space
              characters  or  one  non-IFS white space character together with
              any adjacent IFS white space character delimit a field.   If  an
              IFS  white  space  character  appears twice consecutively in the
              IFS, this character is treated as if it were not  an  IFS  white
              space character.

              If the parameter is unset, the default is used.  Note this has a
              different effect from setting the parameter to an empty string.

       KEYBOARD_HACK
              This variable defines a character to be removed from the end  of
              the  command  line  before  interpreting  it (interactive shells
              only). It is intended  to  fix  the  problem  with  keys  placed
              annoyingly  close  to  return  and  replaces the SUNKEYBOARDHACK
              option which did this for backquotes only.   Should  the  chosen
              character be one of singlequote, doublequote or backquote, there
              must also be an odd number of them on the command line  for  the
              last one to be removed.

              For  backward  compabitility,  if  the SUNKEYBOARDHACK option is
              explicitly set, the value of KEYBOARD_HACK reverts to backquote.
              If  the  option  is  explicitly  unset,  this variable is set to
              empty.

       KEYTIMEOUT
              The time the shell waits, in hundredths of seconds, for  another
              key to be pressed when reading bound multi-character sequences.

       LANG <S>
              This  variable  determines  the locale category for any category
              not specifically selected via a variable starting with `LC_'.

       LC_ALL <S>
              This variable overrides the value of the `LANG' variable and the
              value of any of the other variables starting with `LC_'.

       LC_COLLATE <S>
              This  variable  determines  the  locale  category  for character
              collation information within ranges in  glob  brackets  and  for
              sorting.

       LC_CTYPE <S>
              This  variable  determines  the  locale  category  for character
              handling functions.  If the MULTIBYTE option is in  effect  this
              variable  or  LANG  should  contain  a  value  that reflects the
              character set in use, even if it is a single-byte character set,
              unless  only  the 7-bit subset (ASCII) is used.  For example, if
              the character set is  ISO-8859-1,  a  suitable  value  might  be
              en_US.iso88591  (certain Linux distributions) or en_US.ISO8859-1
              (MacOS).

       LC_MESSAGES <S>
              This variable determines the language in which  messages  should
              be written.  Note that zsh does not use message catalogs.

       LC_NUMERIC <S>
              This  variable affects the decimal point character and thousands
              separator character for the formatted input/output functions and
              string conversion functions.  Note that zsh ignores this setting
              when parsing floating point mathematical expressions.

       LC_TIME <S>
              This variable determines the locale category for date  and  time
              formatting in prompt escape sequences.

       LINES <S>
              The  number  of  lines  for  this  terminal  session.   Used for
              printing select lists and for the line editor.

       LISTMAX
              In the line editor, the number of matches to list without asking
              first.  If  the  value is negative, the list will be shown if it
              spans at most as many lines as given by the absolute value.   If
              set to zero, the shell asks only if the top of the listing would
              scroll off the screen.

       LOGCHECK
              The interval in seconds between checks for login/logout activity
              using the watch parameter.

       MAIL   If  this  parameter  is  set  and mailpath is not set, the shell
              looks for mail in the specified file.

       MAILCHECK
              The interval in seconds between checks for new mail.

       mailpath <S> <Z> (MAILPATH <S>)
              An array (colon-separated list) of filenames to  check  for  new
              mail.  Each filename can be followed by a `?' and a message that
              will be printed.  The message will undergo parameter  expansion,
              command  substitution and arithmetic expansion with the variable
              $_ defined as the name  of  the  file  that  has  changed.   The
              default  message  is  `You  have  new mail'.  If an element is a
              directory instead of a file the  shell  will  recursively  check
              every file in every subdirectory of the element.

       manpath <S> <Z> (MANPATH <S> <Z>)
              An  array  (colon-separated list) whose value is not used by the
              shell.  The manpath array can be useful, however, since  setting
              it also sets MANPATH, and vice versa.

       match
       mbegin
       mend   Arrays  set  by  the  shell  when the b globbing flag is used in
              pattern matches.  See  the  subsection  Globbing  flags  in  the
              documentation for Filename Generation in zshexpn(1).

       MATCH
       MBEGIN
       MEND   Set  by  the  shell  when the m globbing flag is used in pattern
              matches.  See the subsection Globbing flags in the documentation
              for Filename Generation in zshexpn(1).

       module_path <S> <Z> (MODULE_PATH <S>)
              An  array  (colon-separated  list)  of directories that zmodload
              searches for dynamically loadable modules.  This is  initialized
              to          a         standard         pathname,         usually
              `/usr/local/lib/zsh/$ZSH_VERSION'.  (The  `/usr/local/lib'  part
              varies   from   installation  to  installation.)   For  security
              reasons, any value set in the  environment  when  the  shell  is
              started will be ignored.

              These parameters only exist if the installation supports dynamic
              module loading.

       NULLCMD <S>
              The command name to assume if a redirection is specified with no
              command.   Defaults to cat.  For sh/ksh behavior, change this to
              :.  For csh-like behavior, unset this parameter; the shell  will
              print an error message if null commands are entered.

       path <S> <Z> (PATH <S>)
              An  array  (colon-separated  list)  of directories to search for
              commands.  When this parameter is set, each directory is scanned
              and all files found are put in a hash table.

       POSTEDIT <S>
              This  string  is  output  whenever  the  line  editor exits.  It
              usually contains termcap strings to reset the terminal.

       PROMPT <S> <Z>
       PROMPT2 <S> <Z>
       PROMPT3 <S> <Z>
       PROMPT4 <S> <Z>
              Same as PS1, PS2, PS3 and PS4, respectively.

       prompt <S> <Z>
              Same as PS1.

       PROMPT_EOL_MARK
              When  the  PROMPT_CR  and  PROMPT_SP  options   are   set,   the
              PROMPT_EOL_MARK  parameter  can be used to customize how the end
              of partial lines are shown.   This  parameter  undergoes  prompt
              expansion,  with the PROMPT_PERCENT option set.  If not set, the
              default behavior is equivalent to the value `%B%S%#%s%b'.

       PS1 <S>
              The primary prompt string, printed before a command is read.  It
              undergoes  a  special  form of expansion before being displayed;
              see EXPANSION OF PROMPT SEQUENCES in zshmisc(1).  The default is
              `%m%# '.

       PS2 <S>
              The   secondary  prompt,  printed  when  the  shell  needs  more
              information to complete a command.  It is expanded in  the  same
              way  as  PS1.   The  default is `%_> ', which displays any shell
              constructs  or  quotation  marks  which  are   currently   being
              processed.

       PS3 <S>
              Selection  prompt  used within a select loop.  It is expanded in
              the same way as PS1.  The default is `?# '.

       PS4 <S>
              The execution  trace  prompt.   Default  is  `+%N:%i>  ',  which
              displays  the  name  of the current shell structure and the line
              number within it.  In sh or ksh emulation, the default is `+ '.

       psvar <S> <Z> (PSVAR <S>)
              An array (colon-separated list) whose elements can  be  used  in
              PROMPT strings.  Setting psvar also sets PSVAR, and vice versa.

       READNULLCMD <S>
              The  command  name  to  assume  if a single input redirection is
              specified with no command.  Defaults to more.

       REPORTTIME
              If  nonnegative,  commands  whose  combined  user   and   system
              execution  times  (measured  in  seconds)  are greater than this
              value have  timing  statistics  printed  for  them.   Output  is
              suppressed   for  commands  executed  within  the  line  editor,
              including completion; commands explicitly marked with  the  time
              keyword still cause the summary to be printed in this case.

       REPLY  This  parameter  is reserved by convention to pass string values
              between shell scripts and shell builtins in situations  where  a
              function call or redirection are impossible or undesirable.  The
              read builtin and the select complex command may set  REPLY,  and
              filename  generation  both  sets  and  examines  its  value when
              evaluating certain expressions.  Some modules also employ  REPLY
              for similar purposes.

       reply  As REPLY, but for array values rather than strings.

       RPROMPT <S>
       RPS1 <S>
              This  prompt  is  displayed on the right-hand side of the screen
              when the primary prompt is being displayed on  the  left.   This
              does  not  work  if  the  SINGLE_LINE_ZLE  option is set.  It is
              expanded in the same way as PS1.

       RPROMPT2 <S>
       RPS2 <S>
              This prompt is displayed on the right-hand side  of  the  screen
              when  the secondary prompt is being displayed on the left.  This
              does not work if the  SINGLE_LINE_ZLE  option  is  set.   It  is
              expanded in the same way as PS2.

       SAVEHIST
              The  maximum  number  of  history  events to save in the history
              file.

       SPROMPT <S>
              The prompt used for  spelling  correction.   The  sequence  `%R'
              expands   to   the   string   which  presumably  needs  spelling
              correction, and `%r' expands to the  proposed  correction.   All
              other prompt escapes are also allowed.

       STTY   If  this  parameter is set in a command's environment, the shell
              runs the stty command  with  the  value  of  this  parameter  as
              arguments  in  order to set up the terminal before executing the
              command. The modes apply only to the command, and are reset when
              it  finishes  or  is  suspended. If the command is suspended and
              continued later with the fg or wait builtins  it  will  see  the
              modes  specified  by  STTY,  as  if it were not suspended.  This
              (intentionally) does not apply if the command is  continued  via
              `kill  -CONT'.   STTY  is  ignored  if the command is run in the
              background, or if it is in the environment of the shell but  not
              explicitly  assigned  to  in the input line. This avoids running
              stty at every external command  by  accidentally  exporting  it.
              Also  note  that  STTY  should  not  be  used  for  window  size
              specifications; these will not be local to the command.

       TERM <S>
              The type of terminal in use.   This  is  used  when  looking  up
              termcap   sequences.   An  assignment  to  TERM  causes  zsh  to
              re-initialize the terminal, even if the value  does  not  change
              (e.g.,   `TERM=$TERM').    It  is  necessary  to  make  such  an
              assignment upon any change to the terminal  definition  database
              or terminal type in order for the new settings to take effect.

       TERMINFO <S>
              A  reference  to a compiled description of the terminal, used by
              the `terminfo' library when the system has it; see  terminfo(5).
              If  set,  this  causes  the  shell to reinitialise the terminal,
              making the workaround `TERM=$TERM' unnecessary.

       TIMEFMT
              The format of process time reports with the time  keyword.   The
              default is `%J  %U user %S system %P cpu %*E total'.  Recognizes
              the  following  escape  sequences,  although  not  all  may   be
              available on all systems, and some that are available may not be
              useful:

              %%     A `%'.
              %U     CPU seconds spent in user mode.
              %S     CPU seconds spent in kernel mode.
              %E     Elapsed time in seconds.
              %P     The CPU percentage, computed as (100*%U+%S)/%E.
              %W     Number of times the process was swapped.
              %X     The  average  amount  in  (shared)  text  space  used  in
                     kilobytes.
              %D     The average amount in (unshared) data/stack space used in
                     kilobytes.
              %K     The total space used (%X+%D) in kilobytes.
              %M     The  maximum memory the process had in use at any time in
                     megabytes.
              %F     The  number  of  major  page  faults  (page  needed to be
                     brought from disk).
              %R     The number of minor page faults.
              %I     The number of input operations.
              %O     The number of output operations.
              %r     The number of socket messages received.
              %s     The number of socket messages sent.
              %k     The number of signals received.
              %w     Number of voluntary context switches (waits).
              %c     Number of involuntary context switches.
              %J     The name of this job.

              A star may be  inserted  between  the  percent  sign  and  flags
              printing   time.    This   cause  the  time  to  be  printed  in
              `hh:mm:ss.ttt' format (hours and minutes  are  only  printed  if
              they are not zero).

       TMOUT  If  this  parameter  is  nonzero, the shell will receive an ALRM
              signal if a command is not entered within the  specified  number
              of  seconds  after  issuing  a  prompt.  If  there  is a trap on
              SIGALRM, it will be executed and a new alarm is scheduled  using
              the  value  of the TMOUT parameter after executing the trap.  If
              no trap is set, and the idle time of the terminal  is  not  less
              than   the   value  of  the  TMOUT  parameter,  zsh  terminates.
              Otherwise a new alarm is scheduled to TMOUT  seconds  after  the
              last keypress.

       TMPPREFIX
              A  pathname  prefix  which  the shell will use for all temporary
              files.  Note that this should include an initial  part  for  the
              file  name  as  well  as  any  directory  names.  The default is
              `/tmp/zsh'.

       watch <S> <Z> (WATCH <S>)
              An  array  (colon-separated  list)  of  login/logout  events  to
              report.   If  it  contains  the  single  word  `all',  then  all
              login/logout events are reported.  If  it  contains  the  single
              word  `notme', then all events are reported as with `all' except
              $USERNAME.  An entry in this list may consist of a username,  an
              `@'  followed by a remote hostname, and a `%' followed by a line
              (tty).  Any or all of these components  may  be  present  in  an
              entry;  if  a  login/logout  event  matches  all  of them, it is
              reported.

       WATCHFMT
              The format of login/logout reports if  the  watch  parameter  is
              set.   Default  is  `%n  has  %a  %l  from  %m'.  Recognizes the
              following escape sequences:

              %n     The name of the user that logged in/out.

              %a     The observed action, i.e. "logged on" or "logged off".

              %l     The line (tty) the user is logged in on.

              %M     The full hostname of the remote host.

              %m     The hostname up to the first `.'.  If only the IP address
                     is  available  or  the utmp field contains the name of an
                     X-windows display, the whole name is printed.

                     NOTE: The `%m' and `%M' escapes will work only  if  there
                     is  a  host  name  field  in  the  utmp  on your machine.
                     Otherwise they are treated as ordinary strings.

              %S (%s)
                     Start (stop) standout mode.

              %U (%u)
                     Start (stop) underline mode.

              %B (%b)
                     Start (stop) boldface mode.

              %t
              %@     The time, in 12-hour, am/pm format.

              %T     The time, in 24-hour format.

              %w     The date in `day-dd' format.

              %W     The date in `mm/dd/yy' format.

              %D     The date in `yy-mm-dd' format.

              %(x:true-text:false-text)
                     Specifies a ternary expression.  The character  following
                     the  x  is  arbitrary;  the  same  character  is  used to
                     separate the text for the "true" result from that for the
                     "false"   result.   Both  the  separator  and  the  right
                     parenthesis may be escaped  with  a  backslash.   Ternary
                     expressions may be nested.

                     The  test  character x may be any one of `l', `n', `m' or
                     `M', which indicate a `true' result if the  corresponding
                     escape sequence would return a non-empty value; or it may
                     be `a', which indicates a `true' result  if  the  watched
                     user  has  logged  in,  or  `false' if he has logged out.
                     Other characters evaluate to neither true nor false;  the
                     entire expression is omitted in this case.

                     If  the result is `true', then the true-text is formatted
                     according  to  the  rules  above  and  printed,  and  the
                     false-text  is  skipped.   If  `false',  the true-text is
                     skipped and the  false-text  is  formatted  and  printed.
                     Either  or  both  of  the branches may be empty, but both
                     separators must be present in any case.

       WORDCHARS <S>
              A list of non-alphanumeric characters considered part of a  word
              by the line editor.

       ZBEEP  If set, this gives a string of characters, which can use all the
              same codes as the bindkey command as described  in  the  zsh/zle
              module  entry  in  zshmodules(1),  that  will  be  output to the
              terminal instead of beeping.  This may have a visible instead of
              an  audible  effect; for example, the string `[?5h[?5l' on a
              vt100 or xterm will have the effect of flashing reverse video on
              and  off  (if  you usually use reverse video, you should use the
              string `[?5l[?5h' instead).  This takes precedence over  the
              NOBEEP option.

       ZDOTDIR
              The  directory  to search for shell startup files (.zshrc, etc),
              if not $HOME.

       ZLE_LINE_ABORTED
              This parameter is set by the line editor when an  error  occurs.
              It  contains  the line that was being edited at the point of the
              error.  `print -zr -- $ZLE_LINE_ABORTED' can be used to  recover
              the line.  Only the most recent line of this kind is remembered.

       ZLE_REMOVE_SUFFIX_CHARS
       ZLE_SPACE_SUFFIX_CHARS
              These  parameters  are  used  by  the  line  editor.  In certain
              circumstances suffixes (typically space or slash) added  by  the
              completion  system will be removed automatically, either because
              the next editing command was not  an  insertable  character,  or
              because  the  character was marked as requiring the suffix to be
              removed.

              These variables can contain the sets  of  characters  that  will
              cause  the  suffix to be removed.  If ZLE_REMOVE_SUFFIX_CHARS is
              set, those characters will cause the suffix to  be  removed;  if
              ZLE_SPACE_SUFFIX_CHARS  is  set, those characters will cause the
              suffix to be removed and replaced by a space.

              If ZLE_REMOVE_SUFFIX_CHARS is not set, the default behaviour  is
              equivalent to:

                     ZLE_REMOVE_SUFFIX_CHARS=$' 	
;&|'

              If  ZLE_REMOVE_SUFFIX_CHARS  is  set but is empty, no characters
              have this behaviour.  ZLE_SPACE_SUFFIX_CHARS  takes  precedence,
              so that the following:

                     ZLE_SPACE_SUFFIX_CHARS=$'&|'

              causes  the  characters  `&' and `|' to remove the suffix but to
              replace it with a space.

              To  illustrate  the  difference,   suppose   that   the   option
              AUTO_REMOVE_SLASH  is  in  effect and the directory DIR has just
              been completed, with an appended /,  following  which  the  user
              types    `&'.     The    default   result   is   `DIR&'.    With
              ZLE_REMOVE_SUFFIX_CHARS set but without including `&' the result
              is  `DIR/&'.  With ZLE_SPACE_SUFFIX_CHARS set to include `&' the
              result is `DIR &'.

              Note that certain  completions  may  provide  their  own  suffix
              removal  or  replacement  behaviour  which  overrides the values
              described here.  See  the  completion  system  documentation  in
              zshcompsys(1).

       ZLE_RPROMPT_INDENT <S>
              If set, used to give the indentation between the right hand side
              of the right prompt in the line  editor  as  given  by  RPS1  or
              RPROMPT  and the right hand side of the screen.  If not set, the
              value 1 is used.

              Typically this will be used to set the value to 0  so  that  the
              prompt  appears  flush  with  the right hand side of the screen.
              This is not the default as many terminals  do  not  handle  this
              correctly,  in particular when the prompt appears at the extreme
              bottom right of the screen.  Recent virtual terminals  are  more
              likely  to  handle this case correctly.  Some experimentation is
              necessary.



  All copyrights belong to their respective owners. Other content (c) 2014-2018, GNU.WIKI. Please report site errors to webmaster@gnu.wiki.
Page load time: 0.112 seconds. Last modified: November 04 2018 12:49:43.