pconf_detect - A command-line utility for autodetecting printers in
pconf_detect -m [PPORT|NETWORK] -i <info-string>
pconf_detect is a command-line utility for autodetecting printers from
Linux. It is a simple wrapper around libprinterconf's
pconf_detect_printer() function. It currently supports two methods of
autodetection: parallel port detection and network detection.
The detection type is specified with the -m option, which can be
followed by one of two values: PPORT or NETWORK. Detection specific
information is passed following the -i option. For parallel port
detection, this will be a comma-separated string of parallel port
For network detection, it will be some method of specifying a range of
hosts or IP addresses.
The most common form is "10.203.1.2/24", indicating the IP/bitmask to
Other formats include an IP range ("10.203.1.12-30"), an IP/netmask
("10.203.1.2/255.255.255.0"), a simple IP address ("10.203.1.2"), or a
host name ("myprinter.mydomain.com").
[Note: Detection of large network subnets can take a significant amount
pconf_detect will print out a set of formatted text strings, one for
each detected printer.
The actual format of these strings will depend on the detection method.
For parallel port detection, the string will be in the basic form:
"port=p;model=m". For a network printer the form is:
pconf_detect -m PPORT -i 0,1
where "0,1" is a comma-separated list of the parallel port to scan.
pconf_detect -m NETWORK -i "10.203.1.2/24"
where "10.203.1.2/24" is the IP/bitmask to scan.