standards - C and UNIX Standards
The CONFORMING TO section that appears in many manual pages identifies
various standards to which the documented interface conforms. The
following list briefly describes these standards.
V7 Version 7 (also known as Seventh Edition) UNIX, released by
AT&T/Bell Labs in 1979. After this point, UNIX systems diverged
into two main dialects: BSD and System V.
4.2BSD This is an implementation standard defined by the 4.2 release of
the Berkeley Software Distribution, released by the University
of California at Berkeley. This was the first Berkeley release
that contained a TCP/IP stack and the sockets API. 4.2BSD was
released in 1983.
Earlier major BSD releases included 3BSD (1980), 4BSD (1980),
and 4.1BSD (1981).
4.3BSD The successor to 4.2BSD, released in 1986.
4.4BSD The successor to 4.3BSD, released in 1993. This was the last
major Berkeley release.
This is an implementation standard defined by AT&T's milestone
1983 release of its commercial System V (five) release. The
previous major AT&T release was System III, released in 1981.
System V release 2 (SVr2)
This was the next System V release, made in 1985. The SVr2 was
formally described in the System V Interface Definition version
1 (SVID 1) published in 1985.
System V release 3 (SVr3)
This was the successor to SVr2, released in 1986. This release
was formally described in the System V Interface Definition
version 2 (SVID 2).
System V release 4 (SVr4)
This was the successor to SVr3, released in 1989. This version
of System V is described in the "Programmer's Reference Manual:
Operating System API (Intel processors)" (Prentice-Hall 1992,
ISBN 0-13-951294-2) This release was formally described in the
System V Interface Definition version 3 (SVID 3), and is
considered the definitive System V release.
SVID 4 System V Interface Definition version 4, issued in 1995.
Available online at ⟨http://www.sco.com/developers/devspecs/⟩.
C89 This was the first C language standard, ratified by ANSI
(American National Standards Institute) in 1989 (X3.159-1989).
Sometimes this is known as ANSI C, but since C99 is also an ANSI
standard, this term is ambiguous. This standard was also
ratified by ISO (International Standards Organization) in 1990
(ISO/IEC 9899:1990), and is thus occasionally referred to as ISO
C99 This revision of the C language standard was ratified by ISO in
1999 (ISO/IEC 9899:1999). Available online at ⟨http://www.open-
C11 This revision of the C language standard was ratified by ISO in
2011 (ISO/IEC 9899:2011).
"Portable Operating System Interface for Computing
Environments". IEEE 1003.1-1990 part 1, ratified by ISO in 1990
(ISO/IEC 9945-1:1990). The term "POSIX" was coined by Richard
IEEE Std 1003.2-1992, describing commands and utilities,
ratified by ISO in 1993 (ISO/IEC 9945-2:1993).
POSIX.1b (formerly known as POSIX.4)
IEEE Std 1003.1b-1993, describing real-time facilities for
portable operating systems, ratified by ISO in 1996 (ISO/IEC
IEEE Std 1003.1c-1995, which describes the POSIX threads
IEEE Std 1003.1c-1999, which describes additional real-time
IEEE Std 1003.1g-2000, which describes networking APIs
IEEE Std 1003.1j-2000, which describes advanced real-time
A 1996 revision of POSIX.1 which incorporated POSIX.1b and
XPG3 Released in 1989, this was the first significant release of the
X/Open Portability Guide, produced by the X/Open Company, a
multivendor consortium. This multivolume guide was based on the
XPG4 A revision of the X/Open Portability Guide, released in 1992.
XPG4v2 A 1994 revision of XPG4. This is also referred to as Spec 1170,
where 1170 referred to the number of interfaces defined by this
Single UNIX Specification. This was a repackaging of XPG4v2 and
other X/Open standards (X/Open Curses Issue 4 version 2, X/Open
Networking Service (XNS) Issue 4). Systems conforming to this
standard can be branded UNIX 95.
SUSv2 Single UNIX Specification version 2. Sometimes also referred to
as XPG5. This standard appeared in 1997. Systems conforming to
this standard can be branded UNIX 98. See also
This was a 2001 revision and consolidation of the POSIX.1,
POSIX.2, and SUS standards into a single document, conducted
under the auspices of the Austin group ⟨http://www.opengroup.org
/austin/⟩. The standard is available online at
⟨http://www.unix-systems.org/version3/⟩, and the interfaces that
it describes are also available in the Linux manual pages
package under sections 1p and 3p (e.g., "man 3p open").
The standard defines two levels of conformance: POSIX
conformance, which is a baseline set of interfaces required of a
conforming system; and XSI Conformance, which additionally
mandates a set of interfaces (the "XSI extension") which are
only optional for POSIX conformance. XSI-conformant systems can
be branded UNIX 03. (XSI conformance constitutes the Single
UNIX Specification version 3 (SUSv3).)
The POSIX.1-2001 document is broken into four parts:
XBD: Definitions, terms and concepts, header file
XSH: Specifications of functions (i.e., system calls and library
functions in actual implementations).
XCU: Specifications of commands and utilities (i.e., the area
formerly described by POSIX.2).
XRAT: Informative text on the other parts of the standard.
POSIX.1-2001 is aligned with C99, so that all of the library
functions standardized in C99 are also standardized in
Two Technical Corrigenda (minor fixes and improvements) of the
original 2001 standard have occurred: TC1 in 2003 (referred to
as POSIX.1-2003), and TC2 in 2004 (referred to as POSIX.1-2004).
Work on the next revision of POSIX.1/SUS was completed and
ratified in 2008.
The changes in this revision are not as large as those that
occurred for POSIX.1-2001/SUSv3, but a number of new interfaces
are added and various details of existing specifications are
modified. Many of the interfaces that were optional in
POSIX.1-2001 become mandatory in the 2008 revision of the
standard. A few interfaces that are present in POSIX.1-2001 are
marked as obsolete in POSIX.1-2008, or removed from the standard
The revised standard is broken into the same four parts as
POSIX.1-2001, and again there are two levels of conformance: the
baseline POSIX Conformance, and XSI Conformance, which mandates
an additional set of interfaces beyond those in the base
In general, where the CONFORMING TO section of a manual page
lists POSIX.1-2001, it can be assumed that the interface also
conforms to POSIX.1-2008, unless otherwise noted.
Technical Corrigendum 1 (minor fixes and improvements) of this
standard was released in 2013 (referred to as POSIX.1-2013).
Further information can be found on the Austin group web site,
feature_test_macros(7), libc(7), posixoptions(7)
This page is part of release 3.65 of the Linux man-pages project. A
description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.