GNU.WIKI: The GNU/Linux Knowledge Base

  [HOME] [PHP Manual] [HowTo] [ABS] [MAN1] [MAN2] [MAN3] [MAN4] [MAN5] [MAN6] [MAN7] [MAN8] [MAN9]

  [0-9] [Aa] [Bb] [Cc] [Dd] [Ee] [Ff] [Gg] [Hh] [Ii] [Jj] [Kk] [Ll] [Mm] [Nn] [Oo] [Pp] [Qq] [Rr] [Ss] [Tt] [Uu] [Vv] [Ww] [Xx] [Yy] [Zz]


       ntpd - "Network Time Protocol daemon"


       ntpd [-dnSsv] [-f file] [-p file]


       The  ntpd daemon synchronizes the local clock to one or more remote NTP
       servers or local timedelta sensors.  ntpd can also act as an NTP server
       itself,  redistributing  the  local  time.   It  implements  the Simple
       Network Time Protocol version 4, as described  in  RFC  2030,  and  the
       Network Time Protocol version 3, as described in RFC 1305.

       ntpd  uses  the adjtime(2) system call to correct the local system time
       without causing time jumps.  Adjustments larger than 128ms  are  logged
       using  syslog(3) with LOG_INFO priority.  The threshold value is chosen
       to avoid having local clock drift thrash the log files.  Should ntpd be
       started with the -d option, all calls to adjtime(2) will be logged.

       When  ntpd  starts  up,  it  reads  settings from a configuration file,
       typically ntpd.conf(5).

       The options are as follows:

       -d     Do not daemonize.  If this option is specified, ntpd will run in
              the foreground and log to stderr.

       -p file
              Write pid to file

       -f file
              Use  file  as  the  configuration  file,  instead of the default

       -n     Configtest  mode.   Only  check  the  configuration   file   for

       -S     Do  not  set  the  time  immediately  at  startup.   This is the

       -s     Set the time immediately at startup if the local clock is off by
              more  than  180  seconds.   Allows  for a large time correction,
              eliminating the need to run rdate(8) before starting .

       -v     This option allows ntpd  to  send  DEBUG  priority  messages  to

              When  ntpd receives a SIGUSR1 signal, it will write its peer and
              sensor status to syslog.


              default ntpd configuration file

              drift file, written by ntpd periodically and used at startup  to
              get the initial clock drift


       date(1), adjfreq(2), adjtime(2), ntpd.conf(5), rdate(8), timed(8)

       , Network Time Protocol (Version 3), March 1992.

       , Simple Network Time Protocol (SNTP) Version 4, October 1996.


       The ntpd program first appeared in OpenBSD 3.6 .

                         $Mdocdate: November 10 2007 $                 NTPD(8)

  All copyrights belong to their respective owners. Other content (c) 2014-2018, GNU.WIKI. Please report site errors to
Page load time: 0.178 seconds. Last modified: November 04 2018 12:49:43.